Undergraduate Course: Fluid Mechanics (Mechanical) 3 (MECE09011)
Course Outline
School  School of Engineering 
College  College of Science and Engineering 
Credit level (Normal year taken)  SCQF Level 9 (Year 3 Undergraduate) 
Availability  Available to all students 
SCQF Credits  10 
ECTS Credits  5 
Summary  This course addresses four, broad areas of fluid mechanics. The aims are: 1. To develop and apply the concepts introduced in Fluid Mechanics 2 to engineering applications in turbomachinery and flow measurement; 2. To introduce and apply to concepts of similarity and scaling within fluid mechanics; 3. To introduce the Navier Stokes equation and demonstrate its use in simple flows; 4. To review flow measurement devices / techniques, from industrial machines to modern, laserbased methods. 
Course description 
1: Turbomachinery
Lecture 1  Course Overview, Introduction to Turbomachinery
Introduction to course content / structure; Introduction to Turbomachinery; Definitions / classifications (pump/turbine, radial/axial, reaction/impulse).
Lecture 2  Euler Head, Francis Turbine
Head losses (revision); Definition of Euler Head; Derivation of Euler¿s Equation for a Francis turbine.
Lecture 3  Francis Turbine Blade Design
Drawing and analysis of velocity triangles; Selection of guide vane angle; Selection of runner blade angles; Continuity equation for Francis turbine
Lecture 4  Efficiency of rotodynamic machines and sources of loss. Dimensional analysis.
Lecture 5  Similarity laws and Type Number. Introduction to the Pelton turbine.
Lecture 6  Detailed analysis of Pelton turbine and the Wells turbine.
Lecture 7  Wind turbines. Betz limit. Propellers.
Lecture 8  Viscous flow modelling. The Navier Stokes equation. Poiseille flow.
Lecture 9  Viscous flow in circular pipes. Creeping flows and flow past a sphere.
Lecture 10  Mitchell, Rayleigh Step and Journal bearings. Oscillatory flow in pipes, Womersley parameter.
Lecture 11  Flow through porous media. Fluidisation.
Lecture 12  Intoroduction to compressible flows. Jet engines. Thrust and efficiency.
Lecture 13  Propagation of sound waves in air. Speed of sound. Shock wave formation. Mach cone. Sound Pressure Level.
Lecture 14  Linear theory of water wave propagation in deep and shallow water. Energy in a wave.
Lecture 15  Group velocity. Wave refraction. Froude scaling laws for water waves. Breaking waves. Higher order theories. Ship resistance.
Leclture 16  Measurement of turbulent flows. Hot wire and laser Doppler anemometry.
Lecture 17  Outline of Particle Image Velocimetry.
Lecture 18  Course review.
Laboratory Experiments
Laboratory 1  Aerofoil
An introduction to the fluid mechanics of a simple aerofoil. Qualitative examination of flow behaviour around aerofoil for varying angles of attack, and relationship to qualitative lift performance. Quantitative determination of lift and drag coefficients over a range of angles of attack, and comparison with theory / expectations.
Laboratory  2 Wave tank
Generation of sinusoidal waves of different frequency and amplitude in a flume. Measurement of surface elevations and phase velocity. Comparison of measurements with deep and shall water theories. Observation of nonlinearity effects, breaking and capillary waves. Examination of generation and absorption methods.

Entry Requirements (not applicable to Visiting Students)
Prerequisites 
Students MUST have passed:
Fluid Mechanics 2 (SCEE08003)

Corequisites  
Prohibited Combinations  
Other requirements  None 
Information for Visiting Students
Prerequisites  None 
Course Delivery Information

Academic year 2014/15, Available to all students (SV1)

Quota: None 
Course Start 
Semester 2 
Timetable 
Timetable 
Learning and Teaching activities (Further Info) 
Total Hours:
100
(
Lecture Hours 18,
Seminar/Tutorial Hours 10,
Supervised Practical/Workshop/Studio Hours 3,
Formative Assessment Hours 1,
Summative Assessment Hours 3.5,
Programme Level Learning and Teaching Hours 2,
Directed Learning and Independent Learning Hours
62 )

Assessment (Further Info) 
Written Exam
80 %,
Coursework
0 %,
Practical Exam
20 %

Additional Information (Assessment) 
Examination 80%
Practicals 20% 
Feedback 
Not entered 
Exam Information 
Exam Diet 
Paper Name 
Hours & Minutes 

Main Exam Diet S2 (April/May)   2:00  
Learning Outcomes
On completion of the course, the students should be able to
1. Define machine classifications (turbine/pump, centrifugal/radial, reaction/impulse)
2. Explain Euler head, and to derive and use equations for Euler head based upon a Francis turbine
3. To derive and use velocity triangles to design appropriate blade angles for a Francis (radial) and Kaplan (axial) turbines
4. To discuss the factors affecting the efficiency of rotodynamic machines
5. To define and use flow, head and power coefficients in prediction of performance of similar machines
6. To define and use the type number to compare performances of different machine families and to select machines appropriate for particular applications.
7. To define Reynolds, Froude and Womersly numbers, and use them in fluid flow modelling problems.
8. To qualitatively explain the Navier Stokes equation, and solve for Poiseulle and Couette flows
9. To use Couette flow solution as basis for qualitative analysis of hydrodynamic bearings
10. To evaluate the thrust and efficiency of a jet engine
11. To calculate the speed of sound in air and angles of shock wave propagation
12. To understand the basic concepts of linear water theory and to apply these to practical engineering problems e.g. in the design of wave energy devices
13. To describe the principles of operation of Laser Doppler Anamometry (LDA) and Particle Image Velocimetry (PIV) and design appropiate applications

Reading List
Lecture notes, podcasts and videos on LEARN site.
Douglas, Gasiorek, Swaffield and Jack "Fluid Mechanics"; 6th Edition, Pearson (2011)
Fairly comprehensive cover of most of the course material.

Additional Information
Graduate Attributes and Skills 
Not entered 
Keywords  Not entered 
Contacts
Course organiser  Prof Clive Greated
Tel: (0131 6)50 5232
Email: C.A.Greated@ed.ac.uk 
Course secretary  Mrs Lynn Hughieson
Tel: (0131 6)50 5687
Email: Lynn.Hughieson@ed.ac.uk 

