THE UNIVERSITY of EDINBURGH

DEGREE REGULATIONS & PROGRAMMES OF STUDY 2016/2017

University Homepage
DRPS Homepage
DRPS Search
DRPS Contact
DRPS : Course Catalogue : School of Engineering : Civil

Undergraduate Course: Thin-Walled Members and Stability 4 (CIVE10002)

Course Outline
SchoolSchool of Engineering CollegeCollege of Science and Engineering
Credit level (Normal year taken)SCQF Level 10 (Year 4 Undergraduate) AvailabilityAvailable to all students
SCQF Credits10 ECTS Credits5
SummaryThe two segments of this course introduce advanced elements of the theory of structures. The first provides an introduction to the behaviour and algebraic analysis of thin-walled structural members; the second covers the stability of structural elements and their analysis.
Course description LECTURES

Segment 1 Thin-walled structures

L1 Introduction
Structure and aims of the course; uses and advantages of thin-walled members; section properties of thin-walled members; principal axes and rotation of axes; examples on the evaluation of section properties.

L2 Flexure of Beams and Biaxial Bending
Flexural stresses in elastic beams due to bending in the principal plane and due to biaxial bending; examples.

L3 Shear Stresses in Beams with Solid or Open Cross-Sections
Shear stresses in elastic beams with solid cross-sections; Shear stresses in elastic beams with thin walled open cross-sections; shear flow; example on the evaluation of shear flow distribution in an I-section.

L4 The Shear Centre
Shear centre; example on the evaluation of shear centre for a channel section; comparison of centroid and shear centre positions for some sections.

L5 Shear Stresses in Beams with Closed Cross-Sections
Shear stresses in elastic beams with thin-walled closed cross-sections; box section example.

L6 Torsion in Structural Members
Introduction to uniform; warping and non-uniform torsion; Prandtl's membrane analogy for uniform torsion; evaluation of stresses under uniform torsion for general solid and rectangular cross-sections.

L7 Uniform Torsion in Open and Closed Sections
Uniform torsion in thin-walled open cross-sections; uniform torsion in thin-walled closed cross-sections; elastic analysis of statically determinate and statically indeterminate members under uniform torsion; examples.

L8 Warping Torsion in Open Sections
Warping deflections and stresses; warping constant; example to demonstrate the evaluation of warping displacements, shear and longitudinal stresses due to warping torsion; warping torsion analysis of statically determinate and statically indeterminate members with examples; introduction to non-uniform torsion.

L9 Revision


SEGMENT 2 STABILITY OF STRUCTURES

L1 Introduction & elastic bifurcation buckling
Structure and aims of the course, linear buckling as an eigenvalue problem, bifurcation of equilibrium paths, stability of equilibrium.

L2 Imperfections and geometric nonlinearities in elastic structures
Effect of imperfections and nonlinearities; imperfection sensitivity; snap-through buckling.

L3 Buckling in more complex systems
Bilinear elastic columns, testing machines.

L4 Inelastic buckling
Tangent and reduced modulus formulae; Shanley's explanation; Perry treatment.

L5 Local buckling: 1
Introduction to local buckling; derivation of plate buckling loads for various support conditions and directions of load; examination of buckling modes; critical width to thickness ratios.

L6 Local buckling: 2
Postbuckling strength of thin plates in compression and in shear; effect of initial imperfections and residual stresses; design rules.

L7 Torsional and flexural-torsional buckling
Simple torsional buckling; example of a cruciform section; effect of non-uniform twisting; combined mode of twisting and flexure.

L8 Lateral torsional buckling of beams
Lateral torsional buckling of a deep rectangular section (various load cases) and an I-section; effect of level of application of load; overview of buckling phenomena.

L9 Revision

TUTORIALS

Bending of Beams
Evaluation of thin-walled section properties; evaluation of the shear centre position; evaluation of bending stress distribution.

Torsion
Evaluation of twist under uniform torsion and warping torsion; evaluation of torsion and warping constants; uniform and warping torsion analysis of structures.

Theory of elastic stability
Derivation of nonlinear law; derivation of equilibrium expressions for a single degree of freedom system, accounting for the effects of nonlinearities and imperfections; determination of the stability of equilibrium for this system and plotting of all equilibrium paths; explaining imperfection sensitivity.

Applied stability problems
Calculation of the critical stress using tangent and reduced modulus theories and the Perry-Robertson equation; derivation of the critical load for a thin plate from energy equations; calculation of elastic critical stresses due to flexural, torsional, lateral torsional, and local buckling.

Entry Requirements (not applicable to Visiting Students)
Pre-requisites It is RECOMMENDED that students have passed Theory of Structures 3 (CIVE09015)
Co-requisites
Prohibited Combinations Other requirements None
Information for Visiting Students
Pre-requisitesNone
High Demand Course? Yes
Course Delivery Information
Academic year 2016/17, Available to all students (SV1) Quota:  None
Course Start Semester 1
Timetable Timetable
Learning and Teaching activities (Further Info) Total Hours: 100 ( Lecture Hours 22, Seminar/Tutorial Hours 11, Formative Assessment Hours 1, Summative Assessment Hours 2, Programme Level Learning and Teaching Hours 2, Directed Learning and Independent Learning Hours 62 )
Assessment (Further Info) Written Exam 100 %, Coursework 0 %, Practical Exam 0 %
Additional Information (Assessment) The assessment will be made on the basis of:

Degree examination 100%
Feedback Formative, mid-semester and end-of-course.
Exam Information
Exam Diet Paper Name Hours & Minutes
Main Exam Diet S1 (December)Thin-Walled Members and Stability 4 (CIVE10002)2:00
Learning Outcomes
On completion of this course, the student will be able to:
  1. demonstrate the ability to evaluate and explain the behaviour of thin-walled members under bending and torsional loads;
  2. demonstrate the ability to evaluate and explain the behaviour of structural elements undergoing buckling.
Reading List
- Trahair, N.S. and Bradford, M.A., The Behaviour and Design of Steel Structures, London: Chapman & Hall, 1995

- Calladine, C.R., Theory of Shell Structures, Cambridge: Cambridge University Press, 1983

- Timoshenko, S.P. & Gere, J.M., Theory of Elastic Stability, New York: McGraw-Hill, 1961
Additional Information
Graduate Attributes and Skills Not entered
KeywordsNot entered
Contacts
Course organiserDr Yuner Huang
Tel: (0131 6)50 5736
Email: Yuner.Huang@ed.ac.uk
Course secretaryMr Craig Hovell
Tel: (0131 6)51 7080
Email: c.hovell@ed.ac.uk
Navigation
Help & Information
Home
Introduction
Glossary
Search DPTs and Courses
Regulations
Regulations
Degree Programmes
Introduction
Browse DPTs
Courses
Introduction
Humanities and Social Science
Science and Engineering
Medicine and Veterinary Medicine
Other Information
Combined Course Timetable
Prospectuses
Important Information
 
© Copyright 2016 The University of Edinburgh - 3 February 2017 3:33 am