Undergraduate Course: Analogue Electronics (Circuits) 4 (ELEE10020)
Course Outline
School  School of Engineering 
College  College of Science and Engineering 
Credit level (Normal year taken)  SCQF Level 10 (Year 4 Undergraduate) 
Availability  Available to all students 
SCQF Credits  10 
ECTS Credits  5 
Summary  This course introduces students to the important analogue circuits of active filters, sine wave oscillators, relaxation oscillators, switched capacitor circuits and phaselocked loops. The aim is to present and instil the principles of circuit operation and the essential circuit analysis and design techniques to enable students to understand and design the simpler variants of the above circuits and to be capable of extending their understanding to more complex variants. 
Course description 
Lectures
Active Filters
L1 Introduction and Overview
1st and 2nd order transfer functions
L2 Filter sections
Active 1st order section. SallenKey low pass sections and transfer function
L3 Butterworth Approximation
Butterworth transfer function, magnitude characteristic, polezero diagram, derivation of Butterworth polynomial from pole locations. Order of Butterworth.
L4 Butterworth low pass
Synthesis of Butterworth low pass filters from specification.
L5 Chebyshev Approximation 1
Transfer function, magnitude characteristic, order of Chebyshev, Chebyshev features.
L6 Chebyshev Approximation 2
Denormalising Chebyshev low pass. Chebyshev synthesis.
L7 Filter Comparison and High Pass
Comparison of Butterworth, Chebyshev and Bessel. High pass transform.
L8 Sensitivity Analysis
Introduction to band pass and band stop. Sensitivity analysis of filter sections to passive components. Effects of opamp imperfections.
Oscillators and Waveform Generators
L9 Sine wave oscillators 1
Barkhausen Criterion. Phase shift oscillator, Wien Bridge oscillator.
L1 Sine wave oscillators 2
Amplitude control, Colpitts, Hartley, Clapp, Pierce oscillators.
L11 Sine wave oscillators 3
Sensitivity to active device parasitics and variations. Regenerative comparator.
L12 Waveform Generators 1
Simple relaxation oscillator, Triangle wave generator.
L13 Waveform Generators 2
Sawtooth wave generator, Voltagecontrolled oscillator.
Switchedcapacitor circuits
L14 Switchedcap 1
Switched capacitor circuit as a replacement for a resistor, first order analysis
L15 Switchedcap 2
Full SC analysis in zplane, design of SC active filters
L16 Switchedcap 3
Strayinsensitive SC circuits, biquad in SC form
Phaselocked loops
L17 PLL1
Analogue multipliers, Gilbert multiplier Linear phase detectors, XOR gate as a phase detector
L18 PLL2
PLL System diagram, noting that the VCO acts as an integrating element. First order PLLs.
L19 PLL3
Second order PLL, discussion. Leadlag loop filter.
L2 Revision
Tutorials:
One per teaching week.

Entry Requirements (not applicable to Visiting Students)
Prerequisites 
It is RECOMMENDED that students have passed
Analogue Circuits 3 (ELEE09026)

Corequisites  
Prohibited Combinations  
Other requirements  None 
Information for Visiting Students
Prerequisites  Students should be familiar with basic concepts in analogue electronics, such as opamp circuits, the use of feedback, circuit analysis and the operation of MOSFETs and BJTs. 
High Demand Course? 
Yes 
Course Delivery Information

Academic year 2016/17, Available to all students (SV1)

Quota: None 
Course Start 
Semester 2 
Timetable 
Timetable 
Learning and Teaching activities (Further Info) 
Total Hours:
100
(
Lecture Hours 22,
Seminar/Tutorial Hours 11,
Formative Assessment Hours 1,
Summative Assessment Hours 2,
Programme Level Learning and Teaching Hours 2,
Directed Learning and Independent Learning Hours
62 )

Assessment (Further Info) 
Written Exam
100 %,
Coursework
0 %,
Practical Exam
0 %

Additional Information (Assessment) 
Assessment will be based on a single written paper of 120 minutes duration. 
Feedback 
Not entered 
Exam Information 
Exam Diet 
Paper Name 
Hours & Minutes 

Main Exam Diet S2 (April/May)   2:00  
Learning Outcomes
On completion of this course, the student will be able to:
 Demonstrate and work with a full knowledge and understanding of the principles, terminology and conventions of analogue circuits, especially active filter circuits, oscillator circuits, switched capacitor circuits and PhaseLocked Loops (PLL).
 Use a wide range of prior knowledge (including algebraic manipulation, calculus, nodal analysis, Laplace Transforms, operational amplifier circuits, feedback, bode plots, pole/zero analysis) to analyse and design circuits in the categories given in 1 above, and to apply them to different filter sections, sine wave oscillators, relaxation oscillators, multiplier circuits, phase detector circuits, and subcircuits that may be used in such circuits.
 Analyse, specify, conceptualise and synthesise systems and applications that require the use of the circuits in 1 and 2 above, including some that were previously unknown.
 Understand, and be able to analyse and mitigate, the effect of component tolerances on the performance of the circuits in 1 and 2, including the ability to select appropriate component values and types to achieve a specification.

Reading List
Recommended :
"Integrated Electronics", J. Millman & C.C. Halkias (McGrawHill, 1972, ISBN 007Y854939)
Background:
"Active Filter Design", A. Waters, MacMillan, 1991, ISBN 0333488628. Sadly this is out of print and there is only a single copy in the Robertson library. It is short and very good on the filters material.
"Modern Communication Circuits", J Smith, McGrawHill, 0070587302
"Electronic Communication Techniques", P H Young, Merrill, 0024312010
"PhaseLock Basics", W F Egan, Wiley, 0471242616. This is very good on PLLs only. 
Additional Information
Graduate Attributes and Skills 
Not entered 
Keywords  Not entered 
Contacts
Course organiser  Dr Les Haworth
Tel: (0131 6)50 5624
Email: Les.Haworth@ed.ac.uk 
Course secretary  Miss Megan Inch
Tel: (0131 6)51 7079
Email: M.Inch@ed.ac.uk 

