Undergraduate Course: Thermodynamics and Unit Operations 3 (CHEE09017)
|School||School of Engineering
||College||College of Science and Engineering
|Credit level (Normal year taken)||SCQF Level 9 (Year 3 Undergraduate)
||Availability||Available to all students
|Summary||Thermodynamics covers the concepts of Gibbs Free Energy and chemical potential and their relationship to both phase equilibrium and chemical reaction equilibrium in heterogeneous systems and multiple simultaneous reactions. Mixing rules for Equations of State (EoS) are introduced as well as calculation of vapour pressure from EoS.
In the Unit Operations part, simplified binary distillation processes are extended to the most general multi component case. Efficient short cut methods are explored and the principles behind accurate numerical solution procedures for multi component absorption, stripping and distillation processes are introduced; rate-based mass transfer operations for packed columns in application to absorption and stripping are considered and finally basic design principles of adsorption, humidification and drying processes are summarised.
Thermodynamics and unit operations are coordinated to deliver appropriate thermodynamics learning to inform unit operations topics
For clarity Unit Operations and Thermodynamics topics are presented separately, actual delivery may not follow this pattern.
1.Statement of the VLE problem. The Gibbs phase rule. Definition of the Chemical Potential -m. Extensive vs intensive thermodynamic properties. Euler's theorem of homogeneous functions. Partial molar quantities.
2.Clausius-Clapeyron equation. V-L curve. V-S curve. L-S curve. Interpolation of vapour pressure data. Prediction of vapour and sublimation pressures from C-C equation. Chemical potential of a mixture. Fugacity and fugacity
coefficients. Composition dependence of the chemical potential. Ideal mixtures. Activity and activity coefficients.
3.Fugacity of a component in a liquid mixture. Pressure dependence of the chemical potential. Poynting correction factor. Fundamental VLE equation: g-f and f-f approach. Simplified versions of the g-f approach. Vapour pressure equations. Excess Gibbs energy and activitycoefficients. T vs x,y and P vs x,y diagrams -positive and negative deviations.
4. Dew point and bubble point calculation. Calculation of binary T vs x,y, P vs x,y and y vs x plots. Example VLE with azeotrope. Isothermal flash calculation. Example of a binary flash. Gibbs-Duhem equation. Thermodynamic consistency of VLE data. Partial pressures from total pressure data. Example of ethanol-water isothermal data. Gas-liquid equilibrium. Relationship between symmetric and a-symmetric activity coefficients. Liquid-liquid equilibrium. Solid-liquid equilibrium.
5. Sources of thermodynamic data. Two and three parameter law of corresponding states. Prediction of critical constants and acentric factor: Joback and Ambrose methods. Prediction of vapour pressure.
6. Equations of State (EOS). Cubic equations of state (EOS). Parameters from critical constants. Helmholtz free energy (A). Calculation of vapour pressures from EOS. Residual functions and thermodynamic properties from A. Lee and Kesler EOS and tables. Example of L-K and SRK.
7. Mixing rules for EOS. Michelsen-Kistenmacher syndrome. Fugacity coefficients from EOS. Advanced mixing rules for cubic EOS. Properties of EOS at infinite pressure. Sample calculation of VLE using EOS.
8. Thermodynamic models in Aspen/UniSim. Things to watch for in using computer codes Styrene-ethylbenzene example. Thermoworkbench examples. GCEOS.
9. Chemical reaction equilibria. Extent of reaction. Heat of reaction. Equilibrium constant and its temperature dependence. Reference states in common applications. Multiple chemical reactions -reactors in series and Lagrange multipliers.
Unit Operations Topics:
1. Introduction to Unit Operations; Equilibrium stage operations; Thermodynamics of distillation
2.Binary distillations review
3.Multicomponent Distillation: Short Cut Methods
4.Mass transport theories review
5.Packed bed columns
6.Humidification:Principles and methods
7.Drying: Principles and methods
8.Adsorption: Principles and methods
Entry Requirements (not applicable to Visiting Students)
||Other requirements|| None
Information for Visiting Students
|High Demand Course?
Course Delivery Information
|Academic year 2018/19, Available to all students (SV1)
|Learning and Teaching activities (Further Info)
Lecture Hours 40,
Feedback/Feedforward Hours 4,
Formative Assessment Hours 4,
Programme Level Learning and Teaching Hours 4,
Directed Learning and Independent Learning Hours
|Assessment (Further Info)
|Additional Information (Assessment)
||Written Exam: 100%
||Hours & Minutes
|Main Exam Diet S1 (December)||Thermodynamics and Unit Operations 3||3:00|
|Resit Exam Diet (August)||Thermodynamics and Unit Operations 3||3:00|
On completion of this course, the student will be able to:
- Apply the phase rule to determine degrees of freedom and show how these may be satisfied.
- Describe the significance of Chemical Potential in mixtures and understand phase equilibria formulations. Ability to solve vapour liquid equilibrium of non ideal mixtures.
- Understanding of simultaneous reactions at equilibrium.
- Apply the principles of mass, heat transfer and thermodynamics to analyze and synthesize chemical engineering processes.
- Use short cut and graphical methods in design of multicomponent distillation, absorption, stripping and other processes. Analyze critically advantages and disadvantages of various design options and parameters (stage vs. packed columns)
|1. Warren L. McCabe, Julian C. Smith and Peter Harriot, Unit Operations of Chemical Engineering, (Fifth Edition). McGrawHill, 1993.|
2. Robert E. Treybal, Mass Transfer Operations (McGraw-Hill Classic Textbook Reissue Series).
3. J.D. Seader and Ernest J. Henley, Separation Process Principles, John Wiley & Sons, 1998.
4. Coulson and Richardson, Chemical Engineering Vol 6, Ed. by R.K. Sinnott, 3rd Edition, Butterworth-Heinemann, 1999.
5.Smith J.M., Van Ness H.C. & Abbott M.M., Introduction to Chem. Eng. Thermodynamics, McGraw-Hill. 5thEd., 1996.
6. Prausnitz J.M., Lichtenthaler R.N. & de Azevedo E.G., Molecular Thermodynamics of Fluid-Phase Equilibria, 3rd Ed., 1999. Prentice-Hall.
7. Poling B., Prausnitz J.M. & O'Connell J.P., The Properties of Gases and Liquids, 5th Ed., 2000. McGraw-Hill.
8. Perry R.H. and Green D.W., Perry's Chemical Engineers' Handbook. 7th Ed., 1997. McGraw-Hill
|Graduate Attributes and Skills
|Course organiser||Dr Simone Dimartino
Tel: (0131 6)50 5598
|Course secretary||Mr Mohammed Kareem Connor Shaikhuzzaman
Tel: (0131 6)51 3559