Undergraduate Course: Biotechnology and Bioprocess Engineering 5 (CHEE11030)
|School||School of Engineering
||College||College of Science and Engineering
|Credit level (Normal year taken)||SCQF Level 11 (Year 5 Undergraduate)
||Availability||Available to all students
|Summary||This course will be divided in two sections. The two sections will be focused on upstream (Section A) and downstream (Section B) bioprocessing concepts respectively.
The objective the Section A of the course is to provide the students with the necessary insight of the fundamentals of biocatalysis, fermentation and bioreactor engineering design, for the production of high value bio-products.
The objective of section B of the course is to provide the students with the necessary insight of the fundamental principles and common practice of downstream operations to enable recovery and purification of biologics and high value products.
The students will learn to apply the key principles of mass and energy balances in an integrated bioprocess, as well as the novel techniques used for the manufacture of safe and effective biological materials.
The course will link with basic engineering material gained in the first 3 years of studies, and is specially designed to be a continuation of the second year course of "Introduction to Biochemical Engineering 2".
Knowledge of previous ChemEng courses will be reinforced and applied, in specific:
- Unit operations
- Reaction engineering
- Separation processes
- Solids Processing
- Heat, Mass and Momentum Transport
The material is delivered in a mixture of lectures, case studies and novel practical activities.
The topics included in section A are outlined below:
- Introduction and Advanced concepts in biocatalysis and metabolic engineering
- Novel trends in Advanced Bioreactor Design and Scale-up
- Scaling Down: Mini-bioreactors, Microfluidics and High-throughput Automated Biochemical Engineering Platforms
- New trends in bioreactor design: disposable bioreactors for mammalian cells and and biologics production
- Synthetic biology : applying engineering principles to the design of biological systems.
- Advanced tools in bioinformatics and bioprocess optimization
The topics included in section B are outlined below:
- General purification strategy
- Properties of biomolecules relevant to downstream bioprocessing
- Cell disruption and flocculation
- Sedimentation and Centrifugation
- Filtration and membrane separations: Microfiltration, Ultrafiltration, Diafiltration
- Liquid chromatography: principles of liquid adsorption, adsorbents in the bioprocessing industry, theory of chromatography
Entry Requirements (not applicable to Visiting Students)
||Other requirements|| None
Information for Visiting Students
|Pre-requisites||Introduction to Biochemical Engineering, or Biochemistry Introduction
|High Demand Course?
Course Delivery Information
|Academic year 2020/21, Available to all students (SV1)
|Learning and Teaching activities (Further Info)
Lecture Hours 20,
Feedback/Feedforward Hours 10,
Formative Assessment Hours 2,
Summative Assessment Hours 2,
Programme Level Learning and Teaching Hours 2,
Directed Learning and Independent Learning Hours
|Assessment (Further Info)
|Additional Information (Assessment)
||Written exam 100%
||TopHat quizzes (not part of the formal assessment) will be provided to allow students to test their knowledge on selected topics.
Problems will be suggested in self-study materials. Students who attempt these will be able to assess their progress when solutions are uploaded, and discussed them during surgery hour.
Students will be given the opportunity to discuss the course material and the coursework assignment in small groups, which will allow them to seek peer feedback on their progress.
||Hours & Minutes
|Main Exam Diet S2 (April/May)||2:00|
On completion of this course, the student will be able to:
- Apply process engineering principles (mass transfer, thermodynamics and kinetics) to biological systems
- Describe, analyse and design bioprocesses at the industrial scale
- Understand the differences in bioreactor design depending on the bioproduct synthetized and required cell type (bacteria, yeast, algae and mammalian cells)
- Know how to exploit chemical and physical properties of biomolecules to drive their isolation and purification
- Appreciate cutting-edge research in bioinformatics, synthetic biology and bioseparation engineering
|No specific textbook is required but students may find it helpful to consult: |
No specific textbook is required but students may find it helpful to consult:
- Practical Fermentation Technology. McNeil B., Harvey L., Wiley
- Principles of Bioprocess Engineering, P.M. Doran
- Principles of Biochemistry; Lehninger. Nelson D.L., Cox M., Omega
- Advances in Biochemical Engineering Biotechnology, Editor: T. Scheper
- Bioseparations Science and Engineerin, R.G. Harrison, P.W. Todd, S.R. Ridge and D.P. Petrides, 2nd Edition, Oxford University Press, 2015
- Bioseparations Engineering, M.R. Ladisch, Wiley
- Principles of Bioseparations Engineering, R. Ghosh, Wiley
- Protein Chromatography, G. Carta & A. Jungbauer, Wiley
- Fundamentals of Preparative and Nonlinear Chromatographyh, G. Guiochon, Academic Press
In addition, students may find it helpful to consult a biology/biochemistry textbook such as:
- Biochemistry, Berg et al., W.H. Freeman
- Molecular Biology of the Cell, Alberts et al., Garland Science
These are available in the University library.
The following websites will also be useful for content related to synthetic biology and bioinformatics
- Reference will also be made to scientific papers that can be accessed through university subscriptions to journals or on an open access basis.
|Graduate Attributes and Skills
|Keywords||Bioprocess design,biochemical engineering,fermentation,synthetic biology,downstream processing
|Course organiser||Dr Leonardo Rios Solis
Tel: (0131 6)50 7343
|Course secretary||Mrs Shona Barnet
Tel: (0131 6)51 7715