Undergraduate Course: Structural Engineering 3 (CIVE09038)
|School||School of Engineering
||College||College of Science and Engineering
|Credit level (Normal year taken)||SCQF Level 9 (Year 3 Undergraduate)
||Availability||Available to all students
|Summary||In this course, students develop an understanding of the basic concepts in to the design of steel, concrete, timber, composite and other structural elements. The course will cover the design for tensile, compression, shear, flexural, and combined loading.
Structural Engineering 3 will help you develop skills towards design of structures against different performance requirements. By understanding how the loads are carried through structural elements, what internal forces generated by loads, constitutive behaviour of different materials, and possible failure modes, engineers can design structures to meet necessary performance levels.
Topic 1: Introduction: Philosophy of structural design, role of a structural design engineer, role of mechanics-materials-failures-risk and safety, material efficiency-resource minimization-sustainability, tools available for design, understanding the performance, design codes and due diligence.
Topic 2: Design for members under axial loading- mechanics governing the behaviour of structural members subjected to axial loading, incorporating material behaviour, section analysis, failures-crushing-rupture-instability, direct stiffness method for design, Eigen value analysis for bifurcation buckling, FE method for design, Design codes.
Topic 3: Design of members under flexural loads- mechanics governing the behaviour of structural members subjected to axial loading, beam theories, material behaviour, section analysis, failures-section failure-instability, direct stiffness method for design, FE method for design, Design codes.
Topic 4: Design of members subjected to combined axial and flexural loads- internal forces, interaction and section analysis, failures and consideration of instability, direct stiffness method for design, FE method for design, Design codes.
Topic 5: Design of members subjected to shear: internal forces, incorporating material behaviour, design tools, design codes, interactions.
Topic 6: Design for interfaces- mechanics of force transfer between layers, discrete and continuous interface connections, design for interfaces, FE method for interface design, Design codes.
The course will have lectures, self-learning and laboratories that will help the student to understand the principals used in SE3. The students will demonstrate what they have learnt through a group project, concept presentation (group-20% of the final mark), continuing progress assessments (individual/group-30% of the final mark), and final poster presentation (group-50% of the final mark).
Entry Requirements (not applicable to Visiting Students)
||Other requirements|| None
Information for Visiting Students
|High Demand Course?
Course Delivery Information
|Academic year 2022/23, Available to all students (SV1)
|Learning and Teaching activities (Further Info)
Lecture Hours 20,
Seminar/Tutorial Hours 8,
Supervised Practical/Workshop/Studio Hours 6,
Formative Assessment Hours 2,
Summative Assessment Hours 4,
Programme Level Learning and Teaching Hours 2,
Directed Learning and Independent Learning Hours
|Assessment (Further Info)
|Additional Information (Assessment)
||Written Exam %: 0
Practical Exam %: 0
Coursework %: 100
|No Exam Information
On completion of this course, the student will be able to:
- Explain the basis of design, how risk and safety are considered and applied in design.
- Apply knowledge on mechanics of structures, material constitutive laws, failures, and risk and safety to carryout structural designs.
- Carryout designs for structural members subjected to axial, flexural, shear, and combined loading.
- Carryout designs for single material as well as composite structures.
|Russell C. Hibbeler, Structural Analysis, 9th edition, 2014.|
McGuire W., Gallagher R.J. and Ziemian R.D.,Matrix Structural Analysis, 2nd edition. John Wiley & Sons, 2000/2015 (new print).
Gere, J. M. and Goodno, B. J. Mechanics of Materials, Cengage Learning. 2009.
Teng, J.G., Chen, J.F., Smith, S.T. and Lam, L. FRP Strengthened RC Structures, John Wiley & Sons, Ltd, 2002.
Teng, J.G. and Fernando, D. "Flexural strengthening of steel beams with FRP laminates", In FRP Strengthened Metallic Structures, Zhao, X.L., ed., Taylor & Francis, London, UK, 2013.
|Graduate Attributes and Skills
|Course organiser||Prof Dilum Fernando
|Course secretary||Miss Paulina Wisniowska