Undergraduate Course: Chemistry and Processes 2 (CHEE08017)
Course Outline
School | School of Engineering |
College | College of Science and Engineering |
Credit level (Normal year taken) | SCQF Level 8 (Year 2 Undergraduate) |
Availability | Available to all students |
SCQF Credits | 10 |
ECTS Credits | 5 |
Summary | This course has two elements: 1) a series of Engineering example classes and workshops on the mass and energy balance calculation techniques for the analysis and design of chemical processing equipment and 2) Chemistry lectures and tutorials (drawn predominantly from Chemistry 2A). |
Course description |
1) Engineering: simple mass balances and degree-of-freedom analysis
2) Engineering: mass balances with reactions, conversion, extent of reaction, atomic balances, stoichiometry, multiple reactions
3) Engineering: mass balances with recycles, ideal and non-ideal recycle loops, recycle ratios, conversion, yield, purge
4) Engineering: types of energy, closed and open systems, enthalpy, phase change, latent heat, temperature change, heat capacity
5) Engineering: energy balances with reactions, reference states, heat of reaction, heat of formation, Hess's law
6) Chemistry: kinetics, reaction rates
7) Chemistry: separation techniques, mass spectrometry
8) Chemistry: industrial organic chemistry, feedstock, cracking, polymerisation
|
Information for Visiting Students
Pre-requisites | None |
High Demand Course? |
Yes |
Course Delivery Information
|
Academic year 2024/25, Available to all students (SV1)
|
Quota: None |
Course Start |
Semester 1 |
Timetable |
Timetable |
Learning and Teaching activities (Further Info) |
Total Hours:
100
(
Lecture Hours 25,
Seminar/Tutorial Hours 12,
Programme Level Learning and Teaching Hours 2,
Directed Learning and Independent Learning Hours
61 )
|
Assessment (Further Info) |
Written Exam
60 %,
Coursework
40 %,
Practical Exam
0 %
|
Additional Information (Assessment) |
Written Exam %: 60
Practical Exam %:
Coursework %: 40
The School has a 40% Rule for this course, whereby you must achieve a minimum of 40% in coursework and 40% in written exam components, as well as an overall mark of 40% to pass a course. If you fail a course you will be required to resit it. You are only required to resit components which have been failed. |
Feedback |
Chemical Engineering:
You will receive immediate oral feedback during the workshops and written feedback on your coursework. Worked solutions to the example problems will be released to allow you to check your answers and build your confidence. An ungraded weekly online quiz allows you to check your general level of understanding of the content. You will also be able to take advantage of office hours to get immediate individual feedback.
Chemistry:
For the IOC module, you are provided with sample exam questions after the final lecture. Approximately one week before the exam you will attend a seminar where you will go through the sample exam questions and can ask any questions on the material. For the kinetics and spectrometry modules, you will be given a series of tutorial questions. Although these are not marked, you should always attempt the questions in advance of the tutorial session. Answers to the pre-tutorial questions will be supplied; they are a good self-check on how well you have understood the material from the lectures. Use the tutorial to ask questions, answer more demanding questions and clear up any difficulties you have with a particular topic. |
Exam Information |
Exam Diet |
Paper Name |
Hours & Minutes |
|
Main Exam Diet S1 (December) | Chemistry and Processes 2 | 2:120 | | Resit Exam Diet (August) | Chemistry and Processes 2 | 2:120 | |
Learning Outcomes
On completion of this course, the student will be able to:
- Assess feasibility of problem solution by performing degree-of-freedom analyses.
- Perform mass balance calculations on single or multiple units with and without reactions, including both atomic species and extent of reaction balance calculations.
- Perform energy balance calculations on single or multiple units in open and closed systems with and without reactions.
- Perform simultaneous mass and energy balance calculations and analyse the behaviour and performance of systems with one or more recycle streams.
- Embark successfully upon advanced level courses in topics of chemistry relevant to chemical engineers, such as kinetics, separation techniques and industrial organic chemistry.
|
Reading List
Atkins' Physical Chemistry - P.W. Atkins (Eleventh Edition)
The Elements of Physical Chemistry - P.W. Atkins, (Second Edition)
Mass Spectrometry: Basic Principles, Sample Preparations and Related Methods (2014) - Elsa Lundanes, Leon Reubsaet, Tyge Greibrokk
Mass Spectrometry Principles and Applications (3rd Edition) - Edmond de Hoffmann
Industrial Organic Chemistry (2017) - Mark A. Benvenuto
(Ch 2, 7, 12) |
Additional Information
Graduate Attributes and Skills |
Not entered |
Keywords | Not entered |
Contacts
Course organiser | Dr Timm Krueger
Tel: (0131 6)50 5679
Email: Timm.Krueger@ed.ac.uk |
Course secretary | Mr Mark Owenson
Tel: (0131 6)50 5533
Email: Mark.Owenson@ed.ac.uk |
|
|