THE UNIVERSITY of EDINBURGH

DEGREE REGULATIONS & PROGRAMMES OF STUDY 2024/2025

Timetable information in the Course Catalogue may be subject to change.

University Homepage
DRPS Homepage
DRPS Search
DRPS Contact
DRPS : Course Catalogue : School of Engineering : Civil

Undergraduate Course: Geotechnical Engineering 3 (CIVE09016)

Course Outline
SchoolSchool of Engineering CollegeCollege of Science and Engineering
Credit level (Normal year taken)SCQF Level 9 (Year 3 Undergraduate) AvailabilityAvailable to all students
SCQF Credits20 ECTS Credits10
SummaryIn this course, students develop further understanding of soil mechanical concepts and learn to apply them to solve geotechnical engineering problems. The course is a continuation of the second year soil mechanics module and extends the student's understanding of the mechanics of soils to include consolidation and shear failure of soil systems.
Course description LECTURES
L1 Course introduction
Aspects of geotechnical design, structure of the course, course content, references with comments, revision on effective stress concept.
L2 Stress distribution in soils 1
In-situ stresses (revision), stress history, lateral stress ratio, normal and over-consolidation, overconsolidation ratio, factors affecting the induced stresses due to applied loads.
L3 Stress distribution in soils 2
Flexible and rigid footing on cohesive and cohesionless soils, Boussinesq elastic solution of point load at the surface, worked example.
L4 Stress distribution in soils 3
Boussinesq elastic solutions of induced soil stresses due to uniform pressure on a circular area, rectangular area and infinite strip, worked example.
L5 Stress distribution in soils 4
Newmark chart, worked example, Westergaard theory, approximate method, bulb of pressure.
L6 Shear strength 1
Revision on total and effective stress Mohr's circles, Mohr-Coulomb failure criterion, experimental failure envelope, cohesion and internal friction angle.
L7 Shear strength 2
Other useful forms of the Mohr-Coulomb equation, worked example, stress parameters: (tau, sigma), (sigma_1, sigma_3), (t, s), (p, q) and applications.
L8 Shear strength 3 : laboratory measurement of strength
Direct shear: tester, testing procedure, advantages and limitations
Triaxial testing: tester, testing procedure, consolidation stage, volume measurement, pore water pressure measurement, triaxial compression and triaxial extension.
L9 Shear strength 4 : common types of triaxial testing
Unconsolidated-undrained (UU) test, unconfined compression test, consolidated-undrained test (CU), consolidated-drained test (CD).
L10 Shear strength 5 : triaxial test analysis I
Undrained shear strength parameters and effective shear strength parameters, analysis of triaxial test results, worked example.
L11 Shear strength 6 : triaxial test analysis II
Undrained shear strength parameters and effective shear strength parameters, analysis of triaxial test results, worked example.
L12 Shear strength 7
Mechanisms of shearing and straining.
Mechanical behaviour of sands. Response of deviator stress and volumetric strain under axial straining, critical void ratio, residual strength, angle of repose.
L13 Shear strength 8
Mechanical behaviour of clays. Response in drained and undrained tests for normally consolidated and
overconsolidated clays, sensitivity of clays.
L14 Shear strength 9
Pore pressure parameters. Skempton pwp parameters A and B, range of values of the parameters for different clays, worked example. Comments on laboratory sessions 1 and 2 on shear strength measurements.
Comments on Laboratory Sessions 1 & 2 on the triaxial test results.
L15 Consolidation and settlement 1
Consolidation vs compression, important questions: magnitude and rate of settlement, piston-spring analogy, oedometer test, undisturbed sample.
L16 Consolidation and settlement 2
Useful parameters from oedometer test: coefficient of compressibility av, coefficient of volume compressibility mv, compression and swelling indices Cc and Cs, empirical relation on Cc, worked example.
L17 Consolidation and settlement 3
Preconsolidation pressure, causes of overconsolidation, graphical procedure for determining preconsolidation pressure.
L18 Consolidation and settlement 4
Terzaghi theory of one-dimensional consolidation, hydrostatic and excess pore water pressure (pwp), isochrones of excess pwp at various stages, assumptions, derivation.
L19 Consolidation and settlement 5
Solutions to the consolidation differential equation, boundary conditions and initial conditions, average degree of consolidation for a clay stratum, local degree of consolidation, worked example.
L20 Consolidation and settlement 6
Comparison of experimental and theoretical consolidation curves, determination of coefficient of consolidation cv from oedometer test: square-root time method.
L21 Consolidation and settlement 7
Determination of coefficient of consolidation cv from oedometer test: log-time method, determination of permeability k from oedometer test results. Comments on the oedometer test simulation exercise.
L22 Lateral pressures and retaining structures 1
Pressures at Ko and limiting equilibrium states, assumptions in earth pressure theory, Rankine theory of active and passive earth pressures.
L23 Lateral pressures and retaining structures 2
Direction of failure planes, surcharge on backfill, deformations to mobilise active and passive states, active and passive pressure distribution.
L24 Lateral pressures and retaining structures 3
Calculation of wall loads, total and effective stress analysis, worked example.
L25 Lateral pressures and retaining structures 4
Coulomb theory of earth pressures, types and designs of retaining wall.
L26 Lateral pressures and retaining structures 5
Further work example. Coulomb theory of earth pressures. Types and designs of retaining wall.
L27 Bearing capacity of shallow foundations 1
Adequate factor of safety against shear failure in shallow foundations, loading
response of shallow foundations, bearing capacity theories and equation, strip, square and circular footings.
L28 Bearing capacity of shallow foundations 2
Bearing capacity terms and definitions, footings on clays, footings on sands. Work example.
L29 Bearing capacity of shallow foundations 3
Eccentric and inclined loads, worked example.
L30 Bearing capacity of shallow foundations 4
Further worked example and concluding remarks.
L31 Slope stability 1
Introduction to slope stability. Cuttings and embankments. Translational sliding. Worked example.
L32 Slope stability 2
Infinite slope and frictional material. u = 0 analysis. Taylor's curves.
L33 Slope stability 3
Bishop's method of slices, interslice forces, concluding remarks.
L34 Summary and concluding remarks
Recap on the main aspects of foundation design and the topics covered in this course, total stress (undrained) analysis vs effective stress (drained) analysis.


PROBLEM SOLVING SESSIONS
The aim is to give the students ample opportunities to develop skills in problem solving, to apply the theories and methods learned in the course to common geotechnical engineering situations. The exercises cover a variety of geotechnical problems in varying degrees of difficulty.
Session 1: Stress distributions in soils
This session is intended for students to develop skills in calculating the induced stresses in soils due to applied loadings for a variety of situations, including footings of different shapes embedded at different depths.
Session 2: Shear strength
This session is intended for students to develop skills in solving geotechnical problems which require shear strength calculations, including drained and undrained failure properties, analysis of laboratory test results to evaluate the failure stresses and failure properties, total and effective stress paths and calculations involving pwp parameters.
Session 3: Consolidation and settlement
This session is intended for developing skills in performing consolidation settlement analyses. The magnitude of settlement and the time taken to reach a certain degree of consolidation are being evaluated for many geotechnical situations.
Session 4: Lateral earth pressures
This session is intended for developing skills in solving geotechnical problems which require lateral earth pressure calculations.
Session 5: Bearing capacity in shallow foundations
This session is intended for developing skills in performing bearing capacity calculations for various types of footing.
Session 6: Slope stability
This session is intended for developing skills in performing slope stability analyses including use of Taylor's curves and Bishop's method of slices.

LABORATORIES
The students work in groups under the supervision of a laboratory demonstrator, analyse the results and submit laboratory reports for assessment. The aim is to train the students to carry out triaxial tests, including the analysis of the test results and the evaluation of the relevant properties. An analysis of simulated oedometer test data will also be carried out.
Laboratory Session 1 UU testing of clay
The undrained shear strength characteristics of a clay are investigated by UU tests. Each group of students will learn about sample preparation and testing in a triaxial machine. Sample data and testing data are to be recorded in the data sheets. A brief report is to be submitted for assessment.
Laboratory Session 2 Consolidated-undrained testing of clay
The total and effective stress shear strength characteristics of a clay are investigated by CU tests. Every group of students will learn about sample preparation and testing in a triaxial machine. Sample data and testing data are to be recorded in the data sheets. Each group is to carry out one CU test and the results from all groups are then pooled and analysed. A full report is to be submitted for assessment.
Laboratory 3 Oedometer testing of clay
The consolidation and compression properties of a cohesive soil are investigated using an oedometer test. The students will first learn about conducting an oedometer test. They will then analyse the test data to derive the relevant compression and consolidation properties of the clay.
Entry Requirements (not applicable to Visiting Students)
Pre-requisites Students MUST have passed: Geotechnical Engineering 2 (CIVE08025)
Co-requisites
Prohibited Combinations Other requirements None
Information for Visiting Students
Pre-requisites2nd year undergraduate Soil Mechanics/Geomechanics/Geotechnical Engineering or similar
High Demand Course? Yes
Course Delivery Information
Academic year 2024/25, Available to all students (SV1) Quota:  None
Course Start Semester 2
Timetable Timetable
Learning and Teaching activities (Further Info) Total Hours: 200 ( Lecture Hours 38, Seminar/Tutorial Hours 9, Supervised Practical/Workshop/Studio Hours 5, Formative Assessment Hours 1, Summative Assessment Hours 7, Programme Level Learning and Teaching Hours 4, Directed Learning and Independent Learning Hours 136 )
Assessment (Further Info) Written Exam 70 %, Coursework 30 %, Practical Exam 0 %
Additional Information (Assessment) Intermittent Assessment: 30%
Degree Examination: 70%
Feedback Opportunities in lectures, laboratories and tutorial sessions for direct feedback; feedback on each coursework submission; Start-stop-continue in Week 4
Exam Information
Exam Diet Paper Name Hours & Minutes
Main Exam Diet S2 (April/May)2:30
Resit Exam Diet (August)2:30
Learning Outcomes
On completion of this course, the student will be able to:
  1. demonstrate ability to carry out consolidation settlement analyses for a variety of geotechnical situations
  2. demonstrate ability to carry out analyses of the failure of soil systems for a variety of geotechnical situations: footings, shallow foundations, retaining walls, cuttings and embankments
  3. demonstrate ability to describe the mechanical behaviour of sands and clays
  4. demonstrate ability to evaluate the consolidation and failure properties of soils from laboratory testing
Reading List
Recommended reading:
J.A. Knappett and R.F. Craig, Craig's Soil Mechanics, CRC Press, 2019.
T.W. Lambe and R.V. Whitman, Soil Mechanics, Wiley, SI version, 1979.

Background reading:
G.E. Barnes, Soil Mechanics: Principles and Practice, Macmillan, 2010.
M. Bolton, A Guide to Soil Mechanics, M.D.& K.Bolton, 1991.
W. Powrie, Soil Mechanics: Concepts and Applications, CRC Press, 2013.
M. J. Tomlinson, Foundation Design and Construction, Prentice Hall, 7th Ed., 2001.
Additional Information
Graduate Attributes and Skills Not entered
KeywordsNot entered
Contacts
Course organiserProf Jin Ooi
Tel: (0131 6)50 5725
Email: J.Ooi@ed.ac.uk
Course secretaryMiss Lorna Couttie
Tel:
Email: lcouttie@ed.ac.uk
Navigation
Help & Information
Home
Introduction
Glossary
Search DPTs and Courses
Regulations
Regulations
Degree Programmes
Introduction
Browse DPTs
Courses
Introduction
Humanities and Social Science
Science and Engineering
Medicine and Veterinary Medicine
Other Information
Combined Course Timetable
Prospectuses
Important Information