DEGREE REGULATIONS & PROGRAMMES OF STUDY 2022/2023

Before selecting your outside courses, please ensure you have met your Student Adviser.

To enter Year 2 of the programme normally requires passes in at least 80 credit points worth of courses in Year 1.

The School has a 40% Rule for 1st and 2nd year courses, i.e. you must achieve a minimum of 40% in coursework and 40% in written exam components, as well as an overall mark of 40% to pass a course. If you fail a course you will be required to resit it. You are only required to resit components which have been failed.

For Progression to Year 2, please see the requirements listed in the Year 1 notes.

To enter Year 3 of the programme normally requires passes in at least 100 credit points worth of courses in Year 2. The 100 credit points passed must be from the list of courses given in Year 2 of the Degree Programme Table (DPT) of the student's chosen degree programme.

In addition, entry to Year 3 is normally only permitted if the following pre-requisite courses are passed:

- CIVE08026: Structural Mechanics
- MECE08009: Dynamics 2
- SCEE08006: Engineering Thermodynamics 2
- SCEE08003: Fluid Mechanics 2

The School has a 40% Rule for 1st and 2nd year courses, i.e. you must achieve a minimum of 40% in coursework and 40% in written exam components, as well as an overall mark of 40% to pass a course. If you fail a course you will be required to resit it. You are only required to resit components which have been failed.

For progression to Year 3, please see the requirements listed in the Year 2 notes.

To enter Year 4 of the programme requires, in addition to passing the 3rd year, a total of 240 credits of passed courses or recognised prior learning for years 1 and 2 of the Degree Programme Table. [This rule applies to those entering the degree programme from September 2022 onwards]

- The Engineering Council Progression and Graduation Rules -
No more than 30 credits may be compensated for in the degree programme. The following are our rules to enable this condition to be met:

In Year 3 in order to meet the requirements of the Engineering Council, progression require accumulated full passes in 350 credits of courses, with the remaining credits having marks in the range 30 to 39%.

- Resits for Professional Purposes -
Students NOT achieving full passes in 350 credits AND/OR whose remaining credits have results less than 30% will be required to take 'Resits for Professional Purposes' (RPPs). Compensation of any course or group of courses containing unique AHEP learning outcomes is not permitted.

In addition a full pass is required in each of the following courses (i.e. these courses cannot be compensated):

SCEE09001 Professional Issues for Mechanical Engineers 3

For any failed courses not qualifying for compensation, students must carry out 'Resits for Professional Purposes' (RPPs).

Progression will then only be permitted once they have achieved the equivalent of full passes in at least 350 credits of courses plus a result of 30% or above in the remaining 10 credits, including passing all courses for which compensation is not permitted. However the mark obtained at the first attempt will be used to calculate the final year average and degree award.

Once Credits on Aggregate have been awarded for any course, Resits for Professional Purposes will no longer be available for that course.

- Entry to Year 4 MEng -
Entry to Year 4 of the MEng programme normally requires an average of 55% in third year, at the first attempt. Those not achieving an average of 55% or above will be required to transfer to Year 4 of the BEng programme.

- University Progression Rules -
In Years 3, 4, and 5 the University progression and graduation rules normally require full passes in 80 credits of courses with an overall average of 40% or more for the 120 credits of study taken in the relevant honours year.

Graduation on the accredited degree requires the Interdisciplinary Group Design Project to be passed.

- University Progression and Graduation Rules -
In Years 3, 4 and 5 the University progression and graduation rules normally require full passes in 80 credits of courses with an overall average of 40% or more for the 120 credits of study taken in the relevant honours year.

It is only possible for an honours degree to be awarded if the Individual Honours Project has been passed